1 Pneumatic system schematic diagram

2. Requirements for air source

The air source is the power source of the machine pneumatic device. Users should configure specifications according to their actual conditions.

（1）  The output pressure of the air source (air compressor) should not be less than 0.8MPa;

（2）  The actual operating pressure of the machine tool should be within the range of 0.4~0.6MPa;

（3）  Users can adjust the operating pressure according to actual processing conditions;

（4）  If the user uses a pneumatic system on a large scale, in order to ensure the system pressure, it is recommended that the user use a pressure stabilizing device (such as a gas storage tank, etc.);

3. Pneumatic components detailed list