TC203M
Single spindle
3-axis function
Max machining diameter: 20mm
Mechanical spindle
3-axis function
Max machining diameter: 20mm
Mechanical spindle
| Parameters |
|
|
|||
| TC203M |
|
3-axis,single spindle |
|
|
|
| NC system |
|
SYNTEC 22TB |
|
|
|
| Lathe rated power | kw | 8 |
|
|
|
| Machining range |
|
|
|||
| Maximum machining diameter | mm | φ20 |
|
|
|
| Maximum machining length (one-time clamping)With guide bush | mm | 230 |
|
|
|
| Maximum machining length (one-timeclamping)Non guide bush | mm | 2D |
|
|
|
| Main spindle power | kw | 3 |
|
|
|
| Sub spindle power | kw | —— |
|
|
|
| Main spindle max through hole dia | mm | φ23 |
|
|
|
| Main/sub spindle rev speed | rpm | 6000/-- |
|
|
|
| Sub spindle max clamping dia | mm | —— |
|
|
|
| Sub spindle max through hole dia | mm | —— |
|
|
|
| Max tool installed qty |
|
14 |
|
|
|
| OD Turning tool |
|
|
|||
| Qty x Model | mm | 6✖▢12 |
|
|
|
| Cross live tool |
|
|
|||
| Cross live tool | mm | 2✖ER16-2✖ER11 |
|
|
|
| Drilling dia | mm | φ10 |
|
|
|
| Tapping/Threading die dia | mm | M6 |
|
|
|
| Live tool rev speed | rpm | 5500 |
|
|
|
| Live tool power | kw | 1 |
|
|
|
| End -face tool (Mainspindle) |
|
|
|||
| Fixed | Qty x Model | mm | 4✖ER11 |
|
|
| Drilling dia | mm | φ7 |
|
|
|
| Tapping/Threading die dia | mm | M6 |
|
|
|
| Live | Qty x Model | mm | —— |
|
|
| Drilling dia | mm | —— |
|
|
|
| Tapping/Threading die dia |
|
—— |
|
|
|
| Live tool rev speed | mm | —— |
|
|
|
| Live tool power | kw | —— |
|
|
|
| Back end-face tool(Sub spindle) |
|
|
|||
| Fixed | Qty x Model | mm | —— |
|
|
| Drilling dia | mm | —— |
|
|
|
| Tapping/Threading die dia | mm | —— |
|
|
|
| End face live tool | mm | —— |
|
|
|
| Side- Live tool | mm | —— |
|
|
|
| Drilling dia | mm | —— |
|
|
|
| Tapping/Threading die dia | mm | —— |
|
|
|
| Live tool rev speed | mm | —— |
|
|
|
| Live tool power | kw | —— |
|
|
|
| Rapid feed speed | m/min |
18(X) 24(Z/Y) |
|
|
|
| Feed motor power | kw | 0.85 |
|
|
|
| The power capacity | kva | 7.5KVA |
|
|
|
| Air pressure device | mpa | 0.6 |
|
|
|
| Weight | kg | 1600 |
|
|
|
| Dimensions L*W*H | mm | 1950*1070*1650 |
|
|
|
| Main accessary brand and place of origin | |||||
| Name | Origin and brand | ||||
| Operation system | Taiwan SYNTEC | ||||
| Spindle and driver | Oil cooling spindle/Syntec driver | ||||
| Bearing | Japan NKS | ||||
| Guide rail | Japan THK | ||||
| Guide screw | Japan THK | ||||
| Servo Motor | Taiwan SYNTEC | ||||
| Motor driver | Taiwan SYNTEC | ||||
| Elextrical components | Germany Schneider | ||||
| Lubricant system | Japan Herg | ||||
| Relay | Japan Omron | ||||
| Stroke switch | Japan Omron | ||||
| Magnetic value | Taiwan airtag | ||||
■ Each axis equipped with imported high-precision linear guide,ball screws and precise bearings.
■ Using synchronous guide bush structure,realize high-speed and high-precision machining.
■ Key components with gas sealing structure, oil and slag prevention, improving service life and stability.
■ Select high torque motor, high rigidity and high strength slipway for each axis and tool installation seat to meet the requirements of large cutting volume and high processing efficiency.
■ High scalability, tool quantities matched with different requirements of processing, reaching great cost-effective.
■ Extended Z-axis travel can reach 230mm, significantly reduce feeding times and improve processing efficiency.
■ Using synchronous guide bush structure,realize high-speed and high-precision machining.
■ Key components with gas sealing structure, oil and slag prevention, improving service life and stability.
■ Select high torque motor, high rigidity and high strength slipway for each axis and tool installation seat to meet the requirements of large cutting volume and high processing efficiency.
■ High scalability, tool quantities matched with different requirements of processing, reaching great cost-effective.
■ Extended Z-axis travel can reach 230mm, significantly reduce feeding times and improve processing efficiency.
■ SYNTEC numerical control system
■ Main pneumatic chucking device
■ Movable guide bush
■ Synchronal rotary guide bush device
■ Live tool
■ Main pneumatic chucking device
■ Movable guide bush
■ Synchronal rotary guide bush device
■ Live tool
■ MITSUBISHI numerical control system
■ FANUC numerical control system
■ High pressure pump
■ Oil mist collector
■ Chip conveyor
■ FANUC numerical control system
■ High pressure pump
■ Oil mist collector
■ Chip conveyor
