|
No. |
Item |
Content |
|
① |
Lubricating oil level |
The lubricating oil level is higher than the minimum limit line |
|
② |
Cooling oil |
Open the cooling oil tank cap and check whether the cooling oil is sufficient |
|
③ |
Motorized spindle cooling oil |
Is the cooling oil of the electric spindle oil cooler higher than the minimum limit line? |
|
④ |
Tool |
Check whether all tools are intact and consistent with the tool numbers in the program |
|
⑤ |
Chips |
Clean chips from chip flutes |
|
⑥ |
Warning light on the operation panel |
Check if there is an alarm message displayed on the LCD screen |
|
⑦ |
Other lights on the operation panel |
Check the status of lights and buttons |
|
⑧ |
Work lights inside the machine |
Are the work lights inside the machine working properly? |
|
⑨ |
Safety warning three-color light |
Are the three colors of the three-color warning light normal? |
|
⑩ |
Spindle fan and control box |
Hold it close with your hand to check its condition. |
|
⑦ |
Tool clamping |
Check whether the tool installation is reliable |
|
⑪ |
Tool damage |
Make sure the tool is intact. |
|
⑫ |
Adjustment of clamping force |
Check the tightening force of the chuck |
|
⑬ |
Adjustment of guide bushing |
Check the clamping force of the guide bushing and material. |
|
⑪ |
Main/sub spindle |
Apply grease to the sliding part |
|
⑫ |
Abnormal noise |
Check whether the sound of the rotating part and sliding part is normal |
|
⑬ |
Comprehensive inspection |
Check noise and temperature. |
|
⑭ |
Lubricating oil pump |
Check its installation and working condition |